ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Introduction 1-11
v1.0, September 2009
LAN Ports
Left LED Off The LAN port has no link.
On (Green) The LAN port has detected a link with a connected Ethernet device.
Blink (Green) Data is being transmitted or received by the LAN port.
Right LED Off The LAN port is operating at 10 Mbps.
On (Amber) The LAN port is operating at 100 Mbps.
On (Green) The LAN port is operating at 1000 Mbps.
DMZ LED Off Port 4 is operating as a normal LAN port.
On (Green) Port 4 is operating as a dedicated hardware DMZ port.
WAN Ports
Left LED Off The WAN port has no physical link, that is, no Ethernet cable is
plugged into the UTM.
On (Green) The WAN port has a valid connection with a device that provides an
Internet connection.
Blink (Green) Data is being transmitted or received by the WAN port.
Right LED Off The WAN port is operating at 10 Mbps.
On (Amber) The WAN port is operating at 100 Mbps.
On (Green) The WAN port is operating at 1000 Mbps.
Active LED
(UTM25
only)
Off The WAN port is either not enabled or has no link to the Internet.
On (Green) The WAN port has a valid Internet connection.
Table 1-1. LED Descriptions (continued)
Object Activity Description