NETGEAR UTM10EW-100NAS Router User Manual


 
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
8-36 Virtual Private Networking Using SSL Connections
v1.0, September 2009
Apply
Policy For
(continued)
IP Network Policy Name A descriptive name of the SSL VPN policy for identification
and management purposes.
IP Address The network IP address to which the SSL VPN policy is
applied.
Subnet Mask The network subnet mask to which the SSL VPN policy is
applied.
Port Range /
Port Number
A port (enter in the Begin field) or a range of ports (enter in
the Begin and End fields) to which the SSL VPN policy is
applied. Ports can be 0 through 65535. The policy is applied
to all TCP and UDP traffic that passes on those ports. Leave
the fields blank to apply the policy to all traffic.
Service From the pull-down menu, select the service to which the
SSL VPN policy is applied:
VPN Tunnel. The policy is applied only to a VPN tunnel.
Port Forwarding. The policy is applied only to port
forwarding.
All. The policy is applied both to a VPN tunnel and to port
forwarding.
Permission From the pull-down menu, select whether the policy permits
(PERMIT) or denies (DENY) access.
All
Addresses
Policy Name A descriptive name of the SSL VPN policy for identification
and management purposes.
Port Range /
Port Number
A port (enter in the Begin field) or a range of ports (enter in
the Begin and End fields) to which the SSL VPN policy is
applied. Ports can be 0 through 65535. The policy is applied
to all TCP and UDP traffic that passes on those ports. Leave
the fields blank to apply the policy to all traffic.
Service From the pull-down menu, select the service to which the
SSL VPN policy is applied:
VPN Tunnel. The policy is applied only to a VPN tunnel.
Port Forwarding. The policy is applied only to port
forwarding.
All. The policy is applied both to a VPN tunnel and to port
forwarding.
Permission From the pull-down menu, select whether the policy permits
(PERMIT) or denies (DENY) access.
Table 8-10. Add Policy Settings (continued)
Item Description (or Subfield and Description)