NETGEAR UTM10EW-100NAS Router User Manual


 
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
11-24 Monitoring System Access and Performance
v1.0, September 2009
Viewing Active VPN Users
The Active Users screen displays a list of administrators, IPsec VPN, and SSL VPN users that are
currently logged into the UTM.
To display the list of active VPN users:
Select Monitoring > Active Users & VPNs from the main menu. The Active Users & VPN
submenu tabs appear, with the Active Users screen in views.
The active user’s user name, group, and IP address are listed in the table with a timestamp
indicating the time and date that the user logged in.
To disconnect an active user, click the disconnect table button to the right of the user’s table entry.
Viewing VPN Tunnel Connection Status
To review the status of current IPsec VPN tunnels:
1. Select Monitoring > Active Users & VPNs from the main menu. The Active Users & VPN
submenu tabs appear, with the Active Users screen in views
Table 11-11. System Status: Interface Statistics
Setting Description (or Subfield and Description)
For each interface (LAN, WAN1, WAN2, and DMZ for the UTM25, LAN, WAN, and DMZ for the UTM10), the
following statistics are displayed:
Status 10BaseT Half duplex, 10BaseT Full duplex, 100BaseT Half duplex,
100BaseT Full duplex, or No Link.
Tx (KB) The number of transmitted packets in KB.
Rx (KB) The number of received packets in KB.
Figure 11-13