NETGEAR UTM10EW-100NAS Router User Manual


 
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Network and System Management 10-3
v1.0, September 2009
When you define outbound firewall rules, you can further refine their application according to the
following criteria:
Services. You can specify the services or applications to be covered by an outbound rule. If the
desired service or application does not appear in the list, you must define it using the Services
screen (see “Services-Based Rules” on page 5-3 and “Adding Customized Services” on
page 5-30).
LAN Users. You can specify which computers on your network are affected by an outbound
rule. There are several options:
Any. All PCs and devices on your LAN.
Single address. The rule is applied to the address of a particular PC.
Address range. The rule is applied to a range of addresses.
Groups. The rule is applied to a group of PCs. (You can configure groups for LAN WAN
outbound rules but not for DMZ WAN outbound rules.) The Known PCs and Devices
table is an automatically-maintained list of all known PCs and network devices and is
generally referred to as the Network Database, which is described in “Managing the
Network Database” on page 4-13. PCs and network devices are entered into the Network
Database by various methods that are described in “Managing Groups and Hosts (LAN
Groups)” on page 4-12.
WAN Users. You can specify which Internet locations are covered by an outbound rule, based
on their IP address:
Any. The rule applies to all Internet IP address.
Single address. The rule applies to a single Internet IP address.
Address range. The rule is applied to a range of Internet IP addresses.
Schedule. You can configure three different schedules to specify when a rule is applied. Once
a schedule is configured, it affects all rules that use this schedule. You specify the days of the
week and time of day for each schedule. For more information, see “Setting a Schedule to
Block or Allow Specific Traffic” on page 5-39.
QoS Profile. You can define QoS profiles and then apply them to outbound rules to regulate
the priority of traffic. To define QoS profiles, see “Creating Quality of Service (QoS) Profiles”
on page 5-33.
Bandwidth Profile. You can define bandwidth profiles and then apply them to outbound rules
to limit traffic. To define bandwidth profiles, see “Creating Bandwidth Profiles” on page 5-36.