NETGEAR UTM10EW-100NAS Router User Manual


 
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Firewall Protection 5-13
v1.0, September 2009
To create a new outbound LAN WAN service rule:
1. In the LAN WAN Rules screen, click the add table button under the Outbound Services table.
The Add LAN WAN Outbound Service screen displays.
2. Enter the settings as explained in Table 5-2 on page 5-5.
3. Click Apply to save your changes. The new rule is now added to the Outbound Services table.
LAN WAN Inbound Services Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined any
rules, no rules are listed. By default, all inbound traffic (from the Internet to the LAN) is blocked.
Remember that allowing inbound services opens potential security holes in your firewall. Only
enable those ports that are necessary for your network.
Figure 5-3