Filter
Top Products
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Using the Setup Wizard to Provision the UTM in Your Network 2-7
v1.0, September 2009
Almost all screens and sections of screens have an accompanyning help screen. To open the help
screen, click the question mark icon. ( ).
Using the Setup Wizard to Perform the Initial Configuration
The Setup Wizard facilitates the initial configuration of the UTM by taking you through ten
screens, the last of which allows you to save the configuration. If you prefer to perform the initial
WAN setup manually, see Chapter 3, “Manually Configuring Internet and WAN Settings.”
To start the Setup Wizard:
1. Select Wizards from the main navigation menu. The “Welcome to the Netgear Configuration
Wizard” screen displays.
2. Select the Setup Wizard radio button.
3. Click Next.The first Setup Wizard screen displays.
The following sections explain the nine configuration screens of the Setup Wizard. On the 10th
screen, you can save your configuration.
The tables in the following sections explain the buttons and fields of the Setup Wizard screens.
Additional information about the settings in the Setup Wizard screens is provided in other chapters
that explain manual configuration; each section below provides a specific link to a section in
another chapters.
Figure 2-6