NETGEAR UTM10EW-100NAS Router User Manual


 
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
7-46 Virtual Private Networking Using IPsec Connections
v1.0, September 2009
5. Click Apply to save your settings. The new Mode Config record is added to the List of Mode
Config Records table.
Continue the Mode Config configuration procedure by configuring an IKE policy.
6. Select VPN > IPSec VPN from the menu. The IPsec VPN submenu tabs appear with the IKE
Policies screen in view (see Figure 7-20 on page 7-23).
7. Under the List of IKE Policies table, click the add table button. The Add IKE Policy screen
displays. (Figure 7-27 shows the upper part of the UTM25 screen only.) The WAN1 and
WAN2 radio buttons (next to Select Local Gateway) are shown on the Add IKE Policy screen
for the UTM25 but not on the Add IKE Policy screen for the UTM10.
Figure 7-27