NETGEAR UTM10EW-100NAS Router User Manual


 
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
9-6 Managing Users, Authentication, and Certificates
v1.0, September 2009
6. If you change local authentication, click Apply in the Domain screen to save your settings.
To delete one or more domains:
1. In the List of Domains table, select the checkbox to the left of the domain that you want to
delete or click the select all table button to select all domains. You cannot delete a default
domain.
2. Click the delete table button.
Configuring Groups for VPN Policies
The use of groups simplifies the configuration of VPN policies when different sets of users have
different restrictions and access controls. Like the default domain of the UTM, the default group is
also named geardomain. The default group geardomain is assigned to the default domain
geardomain. You cannot delete the default group. In addition, when you create a new domain on
the second SSL VPN Wizard screen (see “SSL VPN Wizard Step 2 of 6: Domain Settings” on
page 8-5), a default group with the same name as the domain is automatically created.
Note: IPsec VPN users always belong to the default domain (geardomain) and are not
assigned to groups.
Note: Groups that are defined in the User menu are used for setting SSL VPN policies.
These groups should not be confused with LAN groups that are defined on the
LAN Groups screen and that are used to simplify firewall policies. For information
about LAN groups, see “Managing Groups and Hosts (LAN Groups)” on
page 4-12.