Filter
Top Products
26
EGX-20 USER'S MANUAL
Adjusting the Driver Settings
Follow the steps below to set the cutting parameters for the driver.
In Dr. Engrave, from the [File] menu, select [Print
Setup].
The [Print Setup] dialog box appears.
Make sure the printer name is set to [Roland EGX-20] (if
the printer name is not [Roland EGX-20], then click the
drop-down arrow and select [Roland EGX-20]), then
click [Properties].
The [Roland EGX-20 on LPT1: Properties] dialog box
appears.
Click the [Tool] tab.
The [Tool] page appears.
Change the values for items that need to be adjusted,
then click [OK].
Clicking at the upper right of the dialog box changes the pointer to , which you can then use to click an
item you want to learn about in detail. A detailed explanation appears.
To return to the [Print Setup] dialog box, click [OK].
1
2
3
4
5