Filter
Top Products
43
--> The spindle motor may have reached the end of its service life. The spindle motor is a consumable part. As a general guide, we
recommend replacing it after every 1,000 hours.
Part of the carriage strikes the material while in the 3D Cutting mode.
--> The maximum cutting depth when in the 3D Cutting mode is 7 mm. Check whether you are attempting to create a relief larger than
this.
The cutter holder cannot be removed.
--> The cutter holder is reverse-threaded. Turn it clockwise to remove it.
Specifications
Main Unit Specifications
Table size 220 (W) x 170 (D) mm (8-5/8 (W) x 6-11/16 (D) in.)
Table load weight Maximum 1 kg (2.2 1b.)
Carriage cutting range 203.2 (X) x 152.4 (Y) x 31.8 (Z) mm (8 (X) x 6 (Y) x 1-1/4 (Z) in.)
Carriage operating speed X and Y axes: 0.1 to 1 mm/s, 1 to 15 mm/s (0.0039 to 0.59 in./s)
Z axis: 0.1 to 1 mm/s, 1 to 6 mm/s (0.0039 to 0.23 in./s)
Cutting-depth control AST (Active Surface Tracking) system
Maximum cutting depth 3D Cutting mode: 0.05 to 7 mm (0.002 to 0.27 in.)
Engraving mode: 0.05 to 1 mm (0.002 to 0.039 in.)
Cuttable material Composition: Resin (acrylic, modeling wax, ABS, polyacetal, polycarbonate, styrenefoam,
etc.), wood, and plaster
Maximum thickness: 30 mm (1-1/8 in.)
Resolution 0.01 mm/step (0.00039 in./step)
Spindle motor 12 W (DC motor)
Spindle rotating speed 4,000 to 15,000 rpm
Overload detection feature Yes
Cutter diameter 3.175 mm (1/8 in.)
Interface Parallel (compliant with IEEE 1284)
Buttons and controls Movement button, (joystick type) Power button, View button, Origin Set button, Speed
control, and Spindle Speed control
Indicators Z-axis light, Power light, View light, and Origin Set light
Power supply Dedicated AC adapter
Input: AC 100 to 240 V ±10%, 50/60 Hz
Output: DC 19 V, 2.1 A
Power consumption Maximum during operation: 0.6 A at 100 V, 0.27 A at 240 V
Operating noise level Standby: Less than 45 dB (A)
No-load operation: Less than 70 dB (A) (according to ISO 7779)
External dimensions 515.2 (W) x 368.3 (D) x 270.6 (H) mm (20-5/16 (W) x 14-1/2 (D) x 10-5/8 (H) in.)
Machine weight 10.9 kg (24 1b.)
Package external dimensions 673 (W) x 518 (D) x 412 (H) mm (26-1/2 (W) x 20-3/8 (D) x16-1/4 (H) in.)
Package weight 15.5 kg (34.2 1b.)
Operating environment Temperature: 5 to 40 ºC (41 to 104 ºF)
Relative humidity: 35 to 80% (no condensation)
Included items and accessories AC adapter, power cord, cutter, cutter holder, depth regulator noses (large and small), adhesive
sheet for mounting material, test-use plate material, hexagonal screwdriver, hexagonal
wrenches (large and small), Roland Software Package, User's Manual
6 Other Information