Filter
Top Products
RT-PRC031-EN 7
Features and Benefits
Application Flexibility
• Chilled water or no cooling
alternatives
• A variety of chilled water coil
offerings to meet a diverse range
of capacity requirements
• Multiple downflow and
horizontal air path options
• An array of heating options are
available, including Electric,
Natural Gas, Steam and Hot
Water. The Gas Heating option
provides a choice of two-stage
gas heat, as well as full
modulating gas heat. Electric
heating options provide four to
six steps of capacity. Hot water
and steam coils have two steaps
of capacity.
• Indoor Air Quality (IAQ)
– Traq Damper System for
precise fresh air
measurement
– Demand Control Ventilation
for CO
2
economizer control
– Compensated outdoor air
control
– Statitrac™ direct space
building pressure control
– Multiple factory installed
filter types, pre evaporator
and final filters
– Humidification control output
– Comparative enthalpy,
Reference enthalpy, or Dry
bulb control for economizers
• Superior Building Automation
interface through LonTalk
• Generic BAS interfaces
• Unit mounted or Remote Human
Interface panels
– All parameters are editable
from the Human Interface
Panel
• Five factory preset ventilation
override sequences which can be
redefined in the field
• Variable Frequency Drives (VFD)
included With or Without Bypass
Control for Supply and Exhaust/
Return Fans.
• CV controls stage heat based on
space requirements.
Integrated Comfort with Trane
Tracer™ LCI
The Tracer Integrated Comfort™
System (ICS) improves job profit and
increases job control by combining
Trane rooftop air handler units with
the Trane Tracer building
management system. This integrated
system provides total building
comfort and control. Some of the
primary motivations for building
owners/managers in deciding to
purchase a HVAC controls system are
energy savings, cost control, and the
convenience of facility automation.
Simplifying the Comfort
System
Trane technology and innovation
brings more capabilities, more
flexibility, and offers equipment and
systems that are easy to use, easy to
Figure 8. Trane Complete Comfort System
IntelliPak™ II Air Handler
install, commission and service. The
Tracer Integrated Comfort system
saves time and money by simplifying
system design and system
installation.
When used with Trane DDC/VAV
terminals (or VariTrane™), system
balancing almost goes away because
each VAV box is commissioned and
tested before it leaves the factory.
All the status information and editing
data from the air handler units, VAV
terminals, lighting, exhaust and other
auxiliary equipment is available from
Tracer for facility control, monitoring
and service support. Tracer, a family
of building automation products
from Trane, is designed with robust,
application specific software