Filter
Top Products
Accessing Storage Devices
P-4 Preface 6-00025-01 Rev A
Chapter 4: Interface to Standalone Drive —
How to use the Standalone Operator Interface, run with the
sysop command
Conventions
The conventions used throughout the AMASS technical books
are listed in the following table:
Convention Example
The word “library” usually includes “jukebox”
and “standalone drive” and is a generic way to
reference a storage device.
If using HP SunSpot jukeboxes, install patch
1234.
Screen text, file names, program names, and
commands are in Courier font.
Request to add a new volume:
Volume group will be “20”
Volume position will be “A123”
The root prompt is shown as a number
symbol.
# su root
What you should type in is shown in Courier
bold font.
bulkinlet 1,2-10,21,23
Site-specific variables are in a Times italics
font.
tar -xvf tapedevicename
A backward slash ( \ ) denotes the input is
continued onto the next line; the printed page
is just not wide enough to accommodate the
line.
#
rsh nodename -n dd \
f=/cdrompath/amass/load.tar\
bs=20b | tar xvBfb - 20
(Type the entire command without the
backward slash.)
Pressing <Return> after each command is
assumed.
A menu name with an arrow refers to a
sequence of menus.
Edit Policy —> Add Library