Filter
Top Products
Accessing Storage Devices
6-00025-01 Rev A Library List 2-35
Step 2. Enter a valid IP address and host name for AMASS.
Step 3. Press <OK> to save the information.
For specific information on installing and
configuring LMCPD library interface, refer to your
IBM documentation.
Load Tape
For instruction on preparing media for use by AMASS, see
“Prepare Media for Network Devices” on page 1-11.
Step 1. Use the bulkload command if your library already
contains volumes that the library interface knows
about but AMASS does not.
Otherwise, use the bulkinlet command. Both
commands perform the following tasks:
• Loads multiple volumes
• Creates an entry in the AMASS database and
populates the entry with a unique volume
number (assigned by AMASS), a preprinted
barcode, and a volume group assignment
• Marks the volumes Online
For specific command options, refer to the Command
Reference chapter in Managing the AMASS File
System.
Host IP address: _______________
Host Name: _______________