Filter
Top Products
Accessing Storage Devices
6-00025-01 Rev A Connectivity and Media Preparation 1-9
3B
For libraries without a mailbox:
mediamove
utility
Move media from drive to slot.
volloc -n Mark the volume “Online” in the AMASS
database
3C
StorageTek Redwood tape drives only:
tapelength Enter the length of tape in the AMASS
database
4 volformat
NOTE: Not
valid for
CD-ROMs
Format the volume
NOTE: If you are using a standalone drive,
format the volume from the Standalone
Operator Interface that was run with the
sysop command. For information on this
interface, see the "Interface to Standalone
Drives" chapter.
5 volstat Mark the volume “Active” in the AMASS
database
• Active = allows AMASS to read and/or
write to media.
Step
Command
or Utility
Description