Filter
Top Products
Accessing Storage Devices
2-46 Library List 6-00025-01 Rev A
Solaris only: If the library configured in AMASS is
connected to a TTY port, disable the ttymon getty
on that port—if it is not already—by using the
admintool/serial port manager. For
information on using this tool, refer to your Sun
administration manual.
Solaris only: If you are using the isp SCSI bus
adapter, disable the wide transfer parameter in
the SCSI passthrough driver AAPjuke’s
configuration file. For instructions, refer to the
/usr/kernel/drv/juke.conf file.
Load and Unload Tape
For instruction on preparing media for use by AMASS, see
“Prepare Media for SCSI Devices” on page 1-8.
Step 1. Inactivate the AMASS system with the amassstat
command before adding or removing media to
prevent the transport mechanism from moving.
Step 2. Load and unload media by manually opening the
door of the library. For a description of the door
operations, refer to your specific library manual.