Filter
Top Products
Accessing Storage Devices
2-18 Library List 6-00025-01 Rev A
ASACA
Supported ASACA libraries include the following models for
tape media.
Tape Storage
The following table lists the supported models for tape media:
Configure on AMASS
Solaris only: If you are using the isp SCSI bus adapter, disable
the wide transfer parameter in the SCSI passthrough driver
AAPjuke’s configuration file. For instructions, refer to the
/usr/kernel/drv/juke.conf file after installing AMASS.
Load and Unload Tape
Step 1. Inactivate the AMASS system with the amassstat
command before adding or removing media to
prevent the transport mechanism from moving.
ASACA
for Tape
Caveats
•V-120
•V-240
• The mediamove utility will move media from a drive
to a home storage slot and from one home storage
slot to another. Use the library’s command for
handling the mailslot door.
• If the medialist utility returns “UNKNOWN”
instead of indicating a slot is either FULL or EMPTY,
run the init_element utility to update the library’s
database and then rerun medialist.
• D-360
• D-480
• N-300
• N-540