Filter
Top Products
Accessing Storage Devices
6-00025-01 Rev A Library List 2-21
Step 4. Respond yes to the prompt after the library is
online.
Unload Tape
Outlet media only when media does not reside in the mailbox.
Step 1. Unload media using the voloutlet command.
Step 2. Remove the media after the library has moved the
volume to the mailbox.
Load Tape in StorLink, 2640, 7100
For instruction on preparing media for use by AMASS, see
“Prepare Media for SCSI Devices” on Page 1-8.
Step 1. Push the green button to open the mailbox. Insert the
media, and close the port.
Step 2. Respond yes to the prompt.
Note
7100 7/68 and 7/100 only: From the control panel, disable
“Auto Inventory.”
If you fail to disable this parameter, AMASS returns “an
internal error”
message when you attempt to load
media. And, if you view the status of elements in the library
with the AMASS medialist utility, it returns a
0x2/0x4/0x2 sense code error.
For instruction on preparing media for use by AMASS, see
“Load Media into Multislot Mailbox” on Page 1-10.