Filter
Top Products
Accessing Storage Devices
6-00025-01 Rev A Library List 2-63
Manual CAP Mode
When the cartridge access port (CAP) is in “set cap mode
manual 0,0,0
”, the ACSLS does not support the AMASS
bulkinlet or volinlet commands. However, the
bulkoutlet or voloutlet commands work as described
above.
CAP Priorities
If the AMASS init_element utility fails and displays an
“I/O STATION is in use” error, change one of the CAP
IDs so that one CAP has priority over the other. To change CAP
ID priorities, perform the following steps:
Step 1. Use the ACSLS Server Software’s accsa
cmd_proc
interface to change priorities. For
information, refer to your StorageTek
documentation.
Step 2. Run set cap to process these changes.
CAP IDs
To change the CAP IDs of the mailbox for a specific jukebox,
edit the /cap_file_jukeboxnumber file, which is created the
first time AMASS attempts to use the library. To edit this file,
perform following steps:
Step 1. Edit the following file to change the CAP IDs of the
mailbox:
# vi
/usr/amass/.juke/cap_file_jukeboxnumber