Filter
Top Products
Accessing Storage Devices
2-24 Library List 6-00025-01 Rev A
Load Tape in Q7
For instruction on preparing media for use by AMASS, see
“Prepare Media for SCSI Devices” on page 1-8.
Step 1. Load media using the volinlet command.
Step 2. Slide the mailbox door open after the “Door
Unlocked
” message displays on the control panel.
Step 3. Insert media into the correct magazine home storage
slot. Slide the mailbox door closed.
To lock the mailbox door, press <MENU> on the
control panel. The library may reinitialize itself at
this point.
Step 4. Respond yes to the prompt.
Unload Tape from Q7
Step 1. Use the voloutlet command to unload media.
The library moves the correct magazine to the
mailbox.
Step 2. Slide the mailbox door open after the “Door
Unlocked
” message displays.
Step 3. Remove the exposed magazine from the library.
Slide the mailbox door closed.
To lock the mailbox door, press <MENU> on the
control panel. The library may reinitialize itself at
this point.
Step 4. Respond yes to the prompt.