Filter
Top Products
Accessing Storage Devices
2-14 Library List 6-00025-01 Rev A
Configure AMASS as a DAS Client
AMASS must be identified as a DAS client. This requires that
tasks be performed on both the UNIX server and on the OS/2
PC. See the following instructions:
On the AMASS UNIX Server
The steps to configure AMASS as a DAS client on the UNIX
server follows.
AMASS uses the configured JUKEBOX numbers from the
installation script to generate default ranges for the EIF (eject
and insert mailboxes) IDs. For example:
- JUKEBOX #1 uses E01 and I01
- JUKEBOX #2 uses E02 and I02
- JUKEBOX #10 uses E10 and I10
Step 1. To change these defaults, modify the
/usr/amass/.juke/eif_file_jukebox-
number file.
Step 2. Restart AMASS after modifying the .juke files.
On the AMU OS/2 PC
The steps to configure AMASS as a DAS client on the OS/2 PC
follows.
Step 1. Set both the EIF and home storage slots to AMU
Dynamic
.
Step 2. Configure the following information found in the
\das\etc\config file: