Filter
Top Products
Accessing Storage Devices
2-50 Library List 6-00025-01 Rev A
Step 2. Open the mailbox by pressing the button on the right
side of the front panel.
Step 3. Insert media into the home storage slot with the
nonlabel end first, side A up.
Unload Optical
Step 1. Enable the “Changer Ejects” option (because the
library unloads media from the drive.).
For instructions on enabling this option, refer to the
hardware manual for your specific model.
Step 2. Unload media using the voloutlet command.
Step 3. Remove the volume from the drive.
Step 4. Close the mailbox by pressing the right hand button
again.
Step 5. Press <RETURN> when prompted by the library.
Configure G Series
To successfully work with AMASS, configure the following
parameters in the Change Options submenu of the Setup
Library menu:
• Changer Ejects: No
• Wait on Load: No
• Open on Export: No
• Address Scheme: 1
• Enable Mail Slot: Yes