Filter
Top Products
104 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3 Commands by Subsystem
:MERGe
(see page 530)
Command Syntax
:MERGe <pixel memory>
<pixel memory> ::= {PMEMory0 | PMEMory1 | PMEMory2 | PMEMory3
| PMEMory4 | PMEMory5 | PMEMory6 | PMEMory7
| PMEMory8 | PMEMory9}
The :MERGe command stores the contents of the active display in the
specified pixel memory. The previous contents of the pixel memory are
overwritten. The pixel memories are PMEMory0 through PMEMory9. This
command is similar to the function of the "Save To: INTERN_<n>" key in
the Save/Recall menu.
See Also • "Introduction to Root (:) Commands" on page 88
• "*SAV (Save)" on page 78
• "*RCL (Recall)" on page 74
• ":VIEW" on page 122
• ":BLANk" on page 94