266 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3 Commands by Subsystem
:SAVE:IMAGe:AREA
(see page 530)
Command Syntax
:SAVE:IMAGe:AREA <area>
<area> ::= {GRATicule | SCReen}
The :SAVE:IMAGe:AREA command sets the area that will be saved as part
of the image. If the :SAVE:IMAGe:FORMat is TIFF, the area is GRATicule.
Otherwise, it is SCReen.
Query Syntax
:SAVE:IMAGe:AREA?
The :SAVE:IMAGe:AREA? query returns the selected image area.
Return Format
<area><NL>
<area> ::= {GRAT | SCR}
See Also • "Introduction to :SAVE Commands" on page 263
• ":SAVE:IMAGe[:STARt]" on page 265
• ":SAVE:IMAGe:FACTors" on page 267
• ":SAVE:IMAGe:FORMat" on page 268
• ":SAVE:IMAGe:INKSaver" on page 269
• ":SAVE:IMAGe:PALette" on page 270