Filter
Top Products
212 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3 Commands by Subsystem
:MARKer:Y2Position
(see page 530)
Command Syntax
:MARKer:Y2Position <position> [suffix]
<position> ::= Y2 cursor position in NR3 format
<suffix> ::= {mV | V | dB}
The :MARKer:Y2Position command sets :MARKer:MODE to MANual, sets
the Y2 cursor position and moves the Y2 cursor to the specified value.
Query Syntax
:MARKer:Y2Position?
The :MARKer:Y2Position? query returns current Y2 cursor position. If the
front-panel cursors are off an error is returned. This is functionally
equivalent to the obsolete :MEASure:VSTOp command/query.
Return Format
<position><NL>
<position> ::= Y2 cursor position in NR3 format
See Also • "Introduction to :MARKer Commands" on page 204
• ":MARKer:MODE" on page 205
• ":MARKer:X1Y1source" on page 207
• ":MARKer:X2Y2source" on page 209
• ":MARKer:Y1Position" on page 211
• ":MEASure:VSTOp" on page 491