Filter
Top Products
312 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3 Commands by Subsystem
:TIMebase:WINDow:SCALe
(see page 530)
Command Syntax
:TIMebase:WINDow:SCALe <scale_value>
<scale_value> ::= scale value in seconds in NR3 format
The :TIMebase:WINDow:SCALe command sets the delayed window
horizontal scale (seconds/division). The main sweep scale determines the
range for this command. The maximum value is one half of the
:TIMebase:SCALe value.
Query Syntax
:TIMebase:WINDow:SCALe?
The :TIMebase:WINDow:SCALe? query returns the current delayed window
scale setting.
Return Format
<scale_value><NL>
<scale_value> ::= current seconds per division for the delayed window
See Also • "Introduction to :TIMebase Commands" on page 302
• ":TIMebase:RANGe" on page 306
• ":TIMebase:POSition" on page 305
• ":TIMebase:SCALe" on page 308
• ":TIMebase:WINDow:RANGe" on page 311