Filter
Top Products
38 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
2 Commands Quick Reference
:MEASure:SDEViation
[<source>] (see
page 238)
:MEASure:SDEViation?
[<source>] (see
page 238)
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= calculated
std deviation in NR3 format
:MEASure:SHOW {1 |
ON} (see page 239)
:MEASure:SHOW? (see
page 239)
{1}
:MEASure:SOURce
[<source1>]
[,<source2>] (see
page 240)
:MEASure:SOURce? (see
page 240)
<source1,2> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= {<source> |
NONE}
n/a :MEASure:TEDGe?
<slope><occurrence>[,
<source>] (see
page 242)
<slope> ::= direction of the
waveform
<occurrence> ::= the transition
to be reported
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= time in
seconds of the specified
transition
n/a :MEASure:TVALue?
<value>,
[<slope>]<occurrence>
[,<source>] (see
page 244)
<value> ::= voltage level that
the waveform must cross.
<slope> ::= direction of the
waveform when <value> is crossed.
<occurrence> ::= transitions
reported.
<return_value> ::= time in
seconds of specified voltage
crossing in NR3 format
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
:MEASure:VAMPlitude
[<source>] (see
page 246)
:MEASure:VAMPlitude?
[<source>] (see
page 246)
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= the amplitude
of the selected waveform in volts
in NR3 format
Table 12 :MEASure Commands Summary (continued)
Command Query Options and Query Returns