Commands by Subsystem 3
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 425
:WAVeform:TYPE
(see page 530)
Query Syntax
:WAVeform:TYPE?
The :WAVeform:TYPE? query returns the acquisition mode associated with
the currently selected waveform. The acquisition mode is set by the
:ACQuire:TYPE command.
Return Format
<mode><NL>
<mode> ::= {NORM | PEAK | AVER | HRES}
See Also • "Introduction to :WAVeform Commands" on page 403
• ":ACQuire:TYPE" on page 132
• ":WAVeform:DATA" on page 410
• ":WAVeform:PREamble" on page 417
• ":WAVeform:SOURce" on page 420