30 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
2 Commands Quick Reference
:CHANnel<n>:INVert
{{0 | OFF} | {1 |
ON}} (see page 149)
:CHANnel<n>:INVert?
(see page 149)
{0 | 1}
<n> ::= 1-2 or 1-4 in NR1 format
:CHANnel<n>:LABel
<string> (see
page 150)
:CHANnel<n>:LABel?
(see page 150)
<string> ::= any series of 6 or
less ASCII characters enclosed in
quotation marks
<n> ::= 1-2 or 1-4 in NR1 format
:CHANnel<n>:OFFSet
<offset>[suffix] (see
page 151)
:CHANnel<n>:OFFSet?
(see page 151)
<offset> ::= Vertical offset
value in NR3 format
[suffix] ::= {V | mV}
<n> ::= 1-2 or 1-4; in NR1 format
:CHANnel<n>:PROBe
<attenuation> (see
page 152)
:CHANnel<n>:PROBe?
(see page 152)
<attenuation> ::= Probe
attenuation ratio in NR3 format
<n> ::= 1-2 or 1-4r in NR1 format
n/a :CHANnel<n>:PROBe:ID?
(see page 153)
<probe id> ::= unquoted ASCII
string up to 11 characters
<n> ::= 1-2 or 1-4 in NR1 format
:CHANnel<n>:PROBe:SKE
W <skew_value> (see
page 154)
:CHANnel<n>:PROBe:SKE
W? (see page 154)
<skew_value> ::= -100 ns to +100
ns in NR3 format
<n> ::= 1-2 or 1-4 in NR1 format
:CHANnel<n>:PROBe:STY
Pe <signal type> (see
page 155)
:CHANnel<n>:PROBe:STY
Pe? (see page 155)
<signal type> ::= {DIFFerential |
SINGle}
<n> ::= 1-2 or 1-4 in NR1 format
:CHANnel<n>:PROTectio
n (see page 156)
:CHANnel<n>:PROTectio
n? (see page 156)
{NORM | TRIP}
<n> ::= 1-2 or 1-4 in NR1 format
:CHANnel<n>:RANGe
<range>[suffix] (see
page 157)
:CHANnel<n>:RANGe?
(see page 157)
<range> ::= Vertical full-scale
range value in NR3 format
[suffix] ::= {V | mV}
<n> ::= 1-2 or 1-4 in NR1 format
:CHANnel<n>:SCALe
<scale>[suffix] (see
page 158)
:CHANnel<n>:SCALe?
(see page 158)
<scale> ::= Vertical units per
division value in NR3 format
[suffix] ::= {V | mV}
<n> ::= 1-2 or 1-4 in NR1 format
:CHANnel<n>:UNITs
<units> (see
page 159)
:CHANnel<n>:UNITs?
(see page 159)
<units> ::= {VOLT | AMPere}
<n> ::= 1-2 or 1-4 in NR1 format
:CHANnel<n>:VERNier
{{0 | OFF} | {1 |
ON}} (see page 160)
:CHANnel<n>:VERNier?
(see page 160)
{0 | 1}
<n> ::= 1-2 or 1-4 in NR1 format
Table 6 :CHANnel<n> Commands Summary (continued)
Command Query Options and Query Returns