Filter
Top Products
Programming Examples 9
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 551
if (id == 0)
{
printf ("Oscilloscope iopen failed!\n");
}
else
{
printf ("Oscilloscope session initialized!\n");
/* Set the I/O timeout value for this session to 5 seconds. */
itimeout(id, TIMEOUT);
/* Clear the interface. */
iclear(id);
iremote(id);
}
initialize();
/* The extras function contains miscellaneous commands that do not
* need to be executed for the proper operation of this example.
* The commands in the extras function are shown for reference
* purposes only.
*/
/* extra(); */ /* <-- Uncomment to execute the extra function */
capture();
analyze();
/* Close the device session to the instrument. */
iclose(id);
printf ("Program execution is complete...\n");
/* For WIN16 programs, call _siclcleanup before exiting to release
* resources allocated by SICL for this application. This call is
* a no-op for WIN32 programs.
*/
_siclcleanup();
}
/*
* initialize
* ------------------------------------------------------------------
* This function initializes both the interface and the oscilloscope
* to a known state.
*/
void initialize (void)
{
/* RESET - This command puts the oscilloscope in a known state.
* Without this command, the oscilloscope settings are unknown.
* This command is very important for program control.
*
* Many of the following initialization commands are initialized
* by this command. It is not necessary to reinitialize them
* unless you want to change the default setting.
*/