Filter
Top Products
416 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3 Commands by Subsystem
The :WAVeform:POINts:MODE? query returns the current points mode.
Setting the points mode will affect what data is transferred. See the
discussion above.
Return Format
<points_mode><NL>
<points_mode> ::= {NORMal | MAXimum | RAW}
See Also • "Introduction to :WAVeform Commands" on page 403
• ":ACQuire:POINts" on page 130
• ":WAVeform:DATA" on page 410
• ":WAVeform:VIEW" on page 427
• ":WAVeform:PREamble" on page 417
• ":WAVeform:POINts" on page 413
• ":TIMebase:MODE" on page 304
• ":ACQuire:TYPE" on page 132
• ":ACQuire:COUNt" on page 127