Filter
Top Products
Language Dictionary - 3
117
*RST
This command resets the to the following factory-defined states:
CAL:STAT OFF [SOUR:]FUNC SIN
DISP:STAT ON [SOUR:]FUNC:CSIN 100%
DISP:MODE TEXT [SOUR:]LIST:COUN 1
INIT:CONT OFF [SOUR:]LIST:STEP AUTO
INST:COUP ALL
[SOUR:]PHAS
φ1=0 φ2=240 φ3=120
INST:NSEL 1
[SOUR:]PHAS:TRIG φ1=0 φ2=240 φ3=120
OUTP OFF [SOUR:]PHAS:MODE FIX
OUTP:COUP AC [SOUR:]PULS:COUN 1
OUTP:DFI OFF [SOUR:]PULS:DCYC 50%
OUTP:DFI:SOUR OFF [SOUR:]PULS:HOLD WIDT
OUTP:IMP OFF [SOUR:]PULS:PER 1
OUTP:IMP:REAL 0 [SOUR:]PULS:WIDT 0.01667s
OUTP:IMP:REAC 0 [SOUR:]VOLT 1
OUTP:PROT:DEL 100ms [SOUR:]VOLT:TRIG 1
OUTP:RI:MODE OFF [SOUR:]VOLT:MODE FIX
OUTP:TTLT OFF [SOUR:]VOLT:OFFS 0
OUTP:TTLT:SOUR BOT [SOUR:]VOLT:OFFS:MODE FIX
SENS:CURR:ACDC:RANG MAX [SOUR:]VOLT:OFFS:TRIG 0
SENS:SWE:OFFS:POIN 0 [SOUR:]VOLT:OFFS:SLEW INF
SENS:SWE:TINT 25µs
[SOUR:]VOLT:OFFS:SLEW:MODE FIX
SENS:WIND KBESsel [SOUR:]VOLT:OFFS:SLEW:TRIG INF
[SOUR:]CURR MAX / 1A
1
[SOUR:]VOLT:PROT MAX
[SOUR:]CURR:PEAK 6.5A / 13A / 26A
2
[SOUR:]VOLT:PROT:STAT OFF
[SOUR:]CURR:PEAK:TRIG 6.5A / 13A / 26A
2
[SOUR:]VOLT:RANG MAX
[SOUR:]CURR:PEAK:MODE FIX [SOUR:]VOLT:SENS:DET RTIME
[SOUR:]CURR:PROT:STAT OFF [SOUR:]VOLT:SENS:SOUR INT
[SOUR:]FREQ 60Hz [SOUR:]VOLT:SLEW INF
[SOUR:]FREQ:MODE FIX [SOUR:]VOLT:SLEW:MODE FIX
[SOUR:]FREQ:SLEW INF [SOUR:]VOLT:SLEW:TRIG INF
[SOUR:]FREQ:SLEW:MODE FIX TRIG:DEL 0
[SOUR:]FREQ:SLEW:TRIG INF TRIG:SOUR BUS
[SOUR:]FREQ:TRIG 60Hz TRIG:SEQ2:SOUR IMM
[SOUR:]FUNC:MODE FIX TRIG:SEQ2:PHAS 0
[SOUR:]FUNC:TRIG SIN TRIG:SEQ3:SOUR BUS
1
Max for Agilent 6811B/6812B/6813B; 1A for Agilent 6814B/6834B/6843A
2
6.5A for Agilent 6811B; 13A for Agilent 6812B; 26A for Agilent 6813B
NOTE: u *RST does not clear any of the status registers or the error queue, and does not affect
any interface error conditions.
u *RST does not affect the data in any of the lists.
u *RST sets the trigger system to the Idle state.
Command Syntax
*RST
Parameters
None
Related Commands
*PSC *SAV