Filter
Top Products
3 - Language Dictionary
120
*WAI
This command instructs the ac source not to process any further commands until all pending operations
are completed. Pending operations are complete when:
u All commands sent before *WAI have been executed. This includes overlapped commands. Most
commands are sequential and are completed before the next command is executed. Overlapped
commands are executed in parallel with other commands. Commands that affect output voltage
or state, relays, and trigger actions are overlapped with subsequent commands sent to the . The
*WAI command prevents subsequent commands from being executed before any overlapped
commands have been completed.
u All triggered actions are completed and the trigger system returns to the Idle state.
*WAI can be aborted only by sending the a GPIB DCL (Device Clear) command.
Command Syntax
WAI?
Parameters
None
Related Commands
*OPC