Agilent Technologies 6814B Welding System User Manual


 
2
Safety Summary
The beginning of the ac source User’s Guide has a Safety Summary page. Be sure you are familiar with
the information on this page before programming the ac source from a controller.
WARNING:
ENERGY HAZARD.
Ac sources can supply 425 V peak at their output. DEATH on
contact may result if the output terminals or circuits connected to the output are
touched when power is applied.
Printing History
The edition and current revision of this manual are indicated below. Reprints of this manual containing
minor corrections and updates may have the same printing date. Revised editions are identified by a new
printing date. A revised edition incorporates all new or corrected material since the previous printing date.
Changes to the manual occurring between revisions are covered by change sheets shipped with the
manual.
This document contains proprietary information protected by copyright. All rights are reserved. No part of
this document may be photocopied, reproduced, or translated into another language without the prior
consent of Agilent Technologies. The information contained in this document is subject to change without
notice.
Copyright 1996-1998, 2000 Agilent Technologies, Inc. Edition 1 __________August, 1996
Edition 2 __________March, 1997
Edition 3 __________December, 1998
Update __________April, 2000