Filter
Top Products
Dukane Manual Part No. 403-570-01
Page 5
Section 1 - Introduction
• Fixture throat depth is a generous 8”.
• Vertical servo actuator operation with adjustable
5” (127 mm) stroke assures quiet operation and is
environmentally safe.
• Industry-standard logic controller and motor
controller means replacement parts are readily
available.
• Several menu languages available: English,
Czech, French, and German.
• ISO9001Certication means that the Dual Servo
Spin Welder is manufactured to exacting quality
standards.
• 24–month domestic warranty assures you of
reliability and quality construction.
Key Dual Servo Spin
Welder Features
• Color touch–screen display uses Color Active Ma-
trix Thin–Film Transistors (TFT) for high contrast
and wide viewing angle even under high ambient–
lighting conditions. The 192 touch–cells provide a
high performance interface.
• Commercial subassemblies are used to ensure a
longer and more economical service life than units
built with proprietary components. These readily
available items also lessen the need for expensive
eld service calls.
• Ultra–rigid square support column minimizes load
deection for precise and repeatable operation.
• Column–mounted direct drive 2.5 or 4.2 HP
spin servo motor for faster cycle times and quick
deceleration to prevent bond shearing and to
produce stronger joints.
• Digital rotary encoders are built into the servo
motors for maximum reliablity. The spin motor
encoder accurately measures and controls the nal
angular orientation to within 0.1° (1 part in 3600),
and the vertical actuator encoder measures the
distance to within .0004” (0.01 mm).
• Weld by time, number of rotations, distance
(absolute or relative), and energy. Built-in sensors
give you the choice of weld methods and triggering
by position or by spin torque.
• Parameter monitoring with programmable upper
and lower limits of weld time, rotations, angular
orientation, energy, peak RPM, peak torque and
cycle time.
• Weldprocessproles.
Spin and vertical servo load and position data can
be downloaded to a PC for review via RS-232.
• Digital timer for weld time and hold time gives
precise control of the spin welding process.