Dukane 403570-01 Welder User Manual


 
Dukane Manual Part No. 403-570-01
Page 83
Section 10 - Maintenance
CAUTION
Never use anything sharp
on the touch screen. Only
use your nger. The screen
is intended for industrial
use, but can be damaged by
scratching or puncturing.
Touch Screen Display
Do not use any solvents or abrasive cleaners on the
touch screen. Apply a small amount of computer cleaner
to a soft towel rst. Clean the panel with the moistened
towel. Do not spray or apply a cleaner directly to the
interface panel.
Remove grease by rubbing lightly with isopropyl
alcohol. Afterward, provide a nal cleaning using a
mild detergent and rinse with clean water.
Do not use any sharp objects on the display. It should
not be touched unnecessarily. It is lit by a long–life
LED backlight and should not require any maintenance
other than occasional cleaning.
AC Power Cord
The AC power cord should be kept in good condition
and free from any cuts and abrasions. The AC plug
should be straight with no bent prongs.
Maintenance
Visually inspect cables once a week, and replace or
repair if necessary.
Lubricate the unpainted area on the front of the
support column as needed with conventional grease.