Filter
Top Products
MAINTENANCE
D-4 D-4
Power MIG® 215XT
GUN HANDLE DISASSEMBLY
The internal parts of the gun handle may be
inspected or serviced if necessary.
The gun handle consists of two halves that
are held together with a collar on each end.
To open up the handle, turn the collars
approximately 60 degrees counterclockwise
(the same direction as removing a right hand
thread) until the collar reaches a stop. Then
pull the collar off the gun handle. If the collars
are difficult to turn, position the gun handle
against a corner, place a screwdriver against
the tab on the collar and give the screwdriver
a sharp blow to turn the collar past an internal
locking rib.
Counterclockwise
English Metric
Description Part No. Size Size
CABLE LINER
For 15' (4.5 m) or KP1934-2 .025 – .030" 0.6 – 0.8 mm
shorter Cable KP1934-1 .035 – .045" 0.9 – 1.2 mm
KP1955-1 3/64" 1.2 mm
(Alum. wire) (Alum. wire)
CONTACT TIPS
Standard Duty KP2020-6B1 .025" 0.6 mm
KP2020-7B1 .030" 0.8 mm
KP2020-1B1* .035" 0.9 mm
KP2020-2B1 .045" 1.2 mm
Heavy Duty KP2021-1B1 .035" 0.9 mm
KP2020-2B1 .045" 1.2 mm
Tapered KP2022-5B1 .025" 0.6 mm
KP2022-6B1 .030" 0.8 mm
KP2022-1B1 .035" 0.9 mm
KP2022-2B1 .045" 1.2 mm
Tab (For Aluminum) KP2010-5B1 3/64" 1.2 mm
(Alum. Wire) (Alum. Wire)
GAS NOZZLES
Fixed (Flush) KP1931-1 3/8" 9.5 mm
KP1931-2 * 1/2" 12.7 mm
KP1931-3 5/8" 15.9 mm
Fixed (Recessed) KP1930-1 3/8" 9.5 mm
KP1930-2 1/2" 12.7 mm
KP1930-3 5/8" 15.9 mm
Requires: Gas
Diffuser As'bly KP2026-3 * .025 – .045" 0.6 – 1.2 mm
Adjustable Slip-On KP1935-2 1/2" 12.7 mm
KP1935-1 5/8" 15.9 mm
Requires:
Nozzle Insulator KP2025-1
As’bly
Requires:
Gas Diffuser KP2026-2 .025 – .030" 0.6 – 0.8 mm
As’bly KP2026-1 .035 – .045" 0.9 – 1.2 mm
Gasless Nozzle KP1947-1 ∆
(For Innershield)
GUN TUBE ASSEMBLIES
Standard (60°) KP2015-1 *
45° KP2041-1
TABLE D.2
ACCESSORIES AND EXPENDABLE REPLACEMENT PARTS
FOR MAGNUM 250L GUN AND CABLE ASSEMBLIES
* Included with POWER MIG® 215XT
∆ Requires KP2026-1 Gas Diffuser Assembly.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC