Lincoln Electric 11521 Welder User Manual


 
This is a typical DC output voltage
waveform generated from a properly
operating machine. Note that each
vertical division represents 10 volts
and that each horizontal division rep-
resents 5 milliseconds in time. The
machine was loaded with a resistance
grid bank.
Note: Scope probes connected at
machine output terminals: (+)
probe to electrode, (-) probe to
work.
SCOPE SETTINGS
Volts/Div.....................10V/Div.
Horizontal Sweep.....5 ms/Div.
Coupling.............................DC
Trigger.........................Internal
TYPICAL OUTPUT VOLTAGE WAVEFORM - MACHINE LOADED
(MAX TAP “G”)
0 volts
5ms
10.0V
TROUBLESHOOTING AND REPAIR
F-23 F-23
Power MIG® 215XT
MACHINE LOADED TO 200 AMPS AT 22 VDC
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC