Filter
Top Products
POWER FEED 10M SINGLE/DUAL
OPERATION
B-3 B-3
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
DEFINITIONS OF WELDING MODES
NON-SYNERGIC WELDING MODES
• A Non-synergic welding mode requires all welding
process variables to be set by the operator.
SYNERGIC WELDING MODES
• A Synergic welding mode offers the simplicity of sin-
gle knob control. The machine will select the correct
voltage and amperage based on the wire feed speed
(WFS) set by the operator
.
COMMON WELDING ABBREVIATIONS
WFS
• Wire Feed Speed
CC
• Constant Current
CV
• Constant Voltage
GMAW (MIG)
• Gas Metal Arc W
elding
GMAW-P (MIG)
• Gas Metal Arc Welding-(Pulse)
GMAW-PP (MIG)
• Gas Metal Arc Welding-(Pulse-on-Pulse)
GT
AW (TIG)
• Gas Tungsten Arc Welding
SMAW (STICK)
• Shielded Metal Arc Welding
FCAW (Innershield or Outershield)
• Flux Core Arc Welding
HF
• High Frequency
CAG
• Carbon Arc Gouging
PRODUCT DESCRIPTION
General Physical Description
The Power Feed 10M Single Wire Feeder is a modular
wire feeder, consisting of two components - a wire
drive and a control box - are available assembled as
a bench unit or as a boom system. High speed, high-
ly reliable digital cables connect the components
together and to the Power Wave power source.
The Power Feed 10M Single Wire Feeder system has
the ability to connect multiple wire feeders to one
power source, use the same power source to weld in
two dif
ferent locations (not simultaneously), or load a
different electrode on each feeder to eliminate change
over time.
The powerful four roll wire drive system sets the indus-
try standard for ease of use. Its patented design allows
for tool-less change out of wire guides and drive rolls
greatly reducing set up time.
General Functional Description
• The Power Feed 10M Single Wire Feeder is a high-
ly versatile wire feeder with easy to use features that
make it easy for the operator to adjust the arc for
specific preferences.
• The new MSP4 panel clearly displays key welding
information. Use the MSP4 panel to quickly adjust
weld settings, arc starting parameters, arc end para-
meters and set-up variables.
• The Power Feed 10M Single Wire Feeder wire feed-
er is provided with an infrared red (IR) port.
Transferring welding settings from one wire feeder to
another is accomplished with a common palm com
-
puter.
• When the Power Feed 10M Single Wire Feeder is
coupled to a Power Wave welding power source, the
result is a welding system with absolutely superior
arc performance.
RECOMMENDED PROCESSES
The Power Feed 10M Single Wire Feeder is well suit-
ed for all MIG welding processes, giving premium arc
performance especially with unusual alloys and out of
position work.
• GMAW • SMAW
• GMAW-Pulse • GTAW (Touch Start TIG only)
• GMAW-STT • CAG
• FCAW