Filter
Top Products
POWER FEED 10M SINGLE/DUAL
OPERATION
B-18 B-18
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
ALUMINUM SYNERGIC GMAW-P (PULSED
MIG)AND GMAW-PP (PULSE ON PULSE)
WELDING
The Power Feed 10M Single Wire Feeder and Power
Wave welding power source combine to readily pro-
duce top quality aluminum welds with excellent
appearance, little spatter and good bead shape. Push-
pull guns are available for consistent feeding when
welding a long distance away from the wire feeder.
Pulse-on-Pulse Welding
The Power Wave system offers both traditional pulse
and Pulse-on-Pulse™. Pulse-on-Pulse (GMAW
-PP) is
an exclusive waveform for aluminum welding. Use it to
make welds with a "stacked dime" appearance, similar
to GTAW welds.
FIGURE B.7c
The pulsing frequency is adjustable. Changing the fre-
quency modulation (or arc control) of the waveform
changes the ripple spacing. Faster travel speeds may
be achieved by using higher values of frequency mod-
ulation.
FIGURE B.7d
Frequency Modulation = -10
Wide weld and ripple spacing, slow travel speed.
Frequency Modulation = 10
Narrow weld and ripple spacing, fast travel speed.
FIGURE B.7e