Filter
Top Products
C-2 C-2
V205-T AC/DC
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
ACCESSORIES
OPTIONAL ACCESSORIES
AND COMPATIBLE EQUIPMENT
Factory Installed
Twist-Mate Cable Connectors
1 – standard for Ground Clamp
1 – Gas Pass through for Tig Torch
Strap Packet
Instruction Manual
Field Installed
K857 - Remote Output Control - For Stick welding.
When the V205-T’s Output Control is in the "REMOTE"
position, this portable current control provides the
same range as the current control on the welder.
Consists of a 6-pin Amphenol connector which plugs
into the remote control Amphenol. 25 foot cable length.
K870 - Foot Amptrol
tm
for TIG welding. When the
V205-T’s Output Control is in the “REMOTE” position,
the foot Amptrol energizes the output and controls the
output remotely. The Foot Amptrol connects directly to
the 6 pin Amphenol.
K963-3 - Hand Amptrol
tm
for TIG welding. When the
V205-T’s Output Control is in the “Remote” position,
the hand Amptrol energizes the output and controls the
output remotely. The Hand Amptrol connects directly to
the 6 pin Amphenol.
K814 - Arc Start Switch - Energizes the output for TIG
welding if remote output control of the amperage is not
desired. It allows on/off TIG welding at the current set
by the Current Control on the control panel. When
using the Arc Start Switch set the Output Control to the
“LOCAL” position.
Magnum® PTA-9 and PTA-17 TIG Torches -
The fol-
lowing standard Magnum® TIG torches with one-piece
cable may be used with the Invertec V205-T.
• K1781-1 PTA-9 12.5 ft medium back cap
• K1781-3 PTA-9 25 ft medium back cap
• K1782-1 PTA-17 12.5 ft long back cap
• K1782-3 PTA-17 25 ft long back cap
NOTE: Each torch requires a Twist-Mate adapter, (one
is included with the machine). Collets, collet bodies,
and nozzles are not included and must be ordered sep-
arately.
TIG TORCH KITS
K2266-1 – TIG-Mate 17 Air Cooled TIG Torch Starter
Pack. One complete easy-to-order kit packaged in its
own portable carrying case. Includes: PTA-17 torch,
parts kit, Harris flowmeter/regulator, 10 ft. gas hose,
Twist-mate™ adapter, work clamp and cable.
K2267-1 – TIG-Mate 20 Water-Cooled TIG Torch
Starter Pack. One complete easy-to-order kit pack-
aged in its own portable carrying case. Includes: PTW-
20 torch, parts kit, Harris flowmeter/regulator, 10 ft. gas
hose, Twist-Mate™ adapter, work clamp and cable,
and 10 ft. water hose.
CABLE PLUGS
K852-70 - Cable Plug Kit for 1/0-2/0 cable. Attaches to
welding cable to provide quick disconnect from
machine.
Twist-Mate Torch Adapter K1622-1 - One is shipped
with the welder torch. If you do not care to interchange
this part between torches
(one is required to connect
Magnum PTA-9 or PTA-17 TIG torches with one-piece
cable to the V205-T)
you may order an additional
adapters. The quick connect plug provides connection
for both gas and welding current.
K1622-4 – Twist-Mate adapter for Water-Cooled TIG
torches. Adapter for PTW-18 and -20 Torches.
TIG Torch Parts Kits - Parts kits are available for the
PTA-9 and PTA-17 TIG torches. These kits include
back cap, collets, collet bodies, nozzles and tungstens.
Order KP507 for PTA-9 torches
Order KP508 for PTA-17 torches
See publication E12.150 for parts kits breakdown.
Cut Length Consumables - TIG welding filler metals
are available for welding stainless steel, mild steel, alu-
minum and copper alloys. See publication C9.10.