Filter
Top Products
TEST PROCEDURE
1. Remove input power to the V205-T
machine.
2. Using a phillips head screwdriver, remove
the case wraparound cover.
3. Perform the Capacitor Discharge
Procedure detailed earlier in this section.
4. Locate the control/display board and asso-
ciated plugs . Do not remove plugs from
the board. See Figure F.8.
5. Carefully apply the correct input voltage to
the V205-T and check for the correct sec-
ondary voltages per Tables F.2, F3 & F.4.
TROUBLESHOOTING & REPAIR
F-24 F-24
V205-T AC/DC
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
CONTROL/DISPLAY BOARD TEST (CONTINUED)
FIGURE F.8 CONTROL/DISPLAY BOARD LOCATION
Control/Display Board