Filter
Top Products
19
Fig. 40
Fig. 41
Fig. 42
ASSEMBLING
EXTENSION WING
1. Assemble extension wing (A) Fig. 39, to the saw
table using three 7/16-20 x 1-1/4″ screws (B) and
lockwashers (C) Fig. 39.
ASSEMBLING SWITCH
TO EXTENSION WING
1. Assemble switch (A) Fig. 41, behind the lip of
extension wing (B) insert 5/16-18 x 1″ flat head screw
(C), then assemble flat washer, and locknut.
2. Fig. 42 illustrates the switch assembled to the
extension wing.
2. With a straight edge (D) Fig. 39, make certain the
extension wing (A) is level with the saw table before
tightening three screws (B) Fig. 40.
Fig. 39
C
B
A
D
B
A
C
B