Filter
Top Products
6
UNPACKING AND CLEANING
Carefully unpack the table saw and all loose items from the shipping containers. Remove the protective coating
from the machined surfaces of the saw. This coating may be removed with a soft cloth moistened with kerosene
(do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with
a good quality household floor paste wax. Fig. 2, illustrates the components of the table saw. Fig. 3, illustrates the
components of the saw stand. Fig. 4, illustrates the components of the Unifence
®.
Figs. 5, 6 and 7 illustrates the
components of the Biesemeyer Fence.
1. Contractor’s Saw
2. Blade Tilting Handwheel
3. Handwheel Lock Knob
4. Blade Guard and Splitter Assembly
5. Table Insert
6. Miter Gage
7. Miter Gage Handle
8. Miter Gage Handle Cap
9. Splitter Mounting Bracket
10. 1/4-20 x 3/4″ Hex Head Screws (2)
11. 1/4″ Flat Washers (2)
12. 5/16-18 x 5/8″ Carriage Head Screw
13. 5/16″ Flat Washer
14. 5/16-18 Hex Nut
15. Arbor Wrenches (2)
16. Extension Table
17. 7/16-20 x 1-3/4″ Hex Head Screws
for assembling extension table (3)
18. Flat Washers for assembling
extension wing (3)
19. 1/4-20 x 3/4″ Flat head Screw
20. Flat Washer
21. Hex Nut
Fig. 2
1
6
2
3
5
7
8
9
11
10
14
13
12
15
18
17
16
21
20
19
4