Filter
Top Products
48
BLADE GUARD ACCESSORIES
Deluxe Uniguard
®
Blade Guard
The Delta Model 34-976 Uniguard Blade Guard with
Splitter and Anti-kickback Fingers Fig. 151, is an
accessory that can be used in place of the standard
blade guard that is supplied with the Contractor’s Saw.
The Delta Model 34-976 Uniguard Blade Guard can be
mounted to the Contractor’s Saw with a UniRip or
Unifence, fence systems.
78-953 Uniguard Strap Kit. Kit replaces the rear angle
rail of Biesemeyer 30" and 50" Commercial Fence
Systems and Home Shop Fence Systems up to 52" for
mounting the No. 34-976 Delta Uniguard Blade Guard.
Mounting hardware included.
Fig. 151
Biesemeyer
®
T-Square
®
Table
Saw Blade Guard System
The Biesemeyer Model 78-960 T-Square Table Saw
Blade Guard System Fig. 152, is an accessory that can
be used in place of the standard blade guard that is
supplied with the Contractor’s Saw.
Catalog Listing Blesemeyer T-Square Blade Guard
Systems
78-960 10" System for Home Shop 52" and Commercial
50" Fence Systems. With T-arm assembly, blade guard,
splitter, installation bracket, mounting hardware and
instruction manual.
78-955 10" System for Home Shop 28", 40" and
Commercial 26", 30" and 38" Fence Systems. Same as
78-960 except for fence systems 40" and under.
Fig. 152