Filter
Top Products
6 - 36
UPC-A Addenda Required
When
Required
is scanned, the engine will only read UPC-A bar codes
that have addenda. You must then turn on a 2 or 5 digit addenda listed on
page 6-35.
Default = Not Required.
Addenda Timeout
You can set a time during which the engine looks for an addenda. If an
addenda is not found within this time period, the data can be either trans-
mitted or discarded, based on the setting you are using for UPC-A
Addenda Required (see page 6-36). Set the length (in milliseconds) for
this timeout by scanning the bar code below, then setting the timeout (from
0-65535 milliseconds) by scanning digits from the Programming Chart,
then scanning Save.
Default = 100.
Note: The Addenda Timeout setting is applied to all addenda and coupon
code searches.
UPC-A Addenda Separator
When this feature is on, there is a space between the data from the bar
code and the data from the addenda. When turned off, there is no space.
Default = Off.
* Not Required
Required
Addenda Timeout
* Off
On