Filter
Top Products
3 - 1
3
Input/Output Settings
Power Up Beeper
The engine can be programmed to beep when it’s powered up. If you are using
a cordless system, the base can also be programmed to beep when it is pow-
ered up. Scan the Off bar code(s) if you don’t want a power up beep.
Default =
Power Up Beeper On - Engine.
Beep on BEL Character
You may wish to force the engine to beep upon a command sent from the host.
If you scan the following Beep on BEL On bar code, the engine will beep every
time a BEL character is received from the host.
Default = Beep on BEL Off.
Power Up Beeper Off -
Engine
* Power Up Beeper On -
Engine
*Beep on BEL Off
Beep on BEL On