Filter
Top Products
3 - 21
Scan Transmit Partial Sequence to transmit partial sequences. (Any
fields in the sequence where no data match occurred will be skipped in the
output.)
If you have programmed a Sequence Timeout (page 3-20) and
the timeout is reached, the partial sequence is transmitted.
Default = Dis-
card Partial Sequence.
Require Output Sequence
When an output sequence is Required, all output data must conform to an
edited sequence or the engine will not transmit the output data to the host
device. When it’s On/Not Required, the engine will attempt to get the out-
put data to conform to an edited sequence but, if it cannot, the engine
transmits all output data to the host device as is.
When the output sequence is
Off
, the bar code data is output to the host as
the engine decodes it.
Default = Off.
Transmit Partial Sequence
* Discard Partial Sequence
Required
On/Not Required
*Off