Filter
Top Products
3 - 5
LED Settings
Activation Settings
Caution: When working with Activation settings, enable the settings you
want before disabling those you do not want to use. If you
disable settings first, you may program the engine so it is unable
to read bar codes. if this happens, power cycle the engine and
scan the defaults bar code on page 1-4.
Activation Defaults
If you want the Activation default settings restored to your engine, scan the
Activation Defaults bar code below. The engine will reset to the custom
default settings (see Setting Custom Defaults on page 1-4). If there are no
custom defaults, it will reset the engine to the factory default settings. Any
settings that have not been specified through the custom defaults will be
defaulted to the factory default settings.
LED Off
* LED On with Good Scan
LED On with Laser
LED On when CodeGate
Disabled
LED On with CTS
Activation Defaults