Filter
Top Products
3 - 16
When Aimer on 100 milliseconds is selected, the aimer is on for 100 millisec-
onds before the scan engine starts normal scanning operation.
Note: Aimer is not available in Class 1 Laser models.
User-Specified Aimer Delays
If you want to set your own length for the duration of the delay
before
acti-
vation, scan the Before Activation bar code below, then set the time-out
by scanning digits (0-65535 seconds) from the Programming Chart, then
scanning Save. Default = 0 seconds.
* Aimer Always Off
Aimer Always On
Aimer Controlled by External AIming Pin
Aimer on 100 milliseconds
Before Activation