Filter
Top Products
3 - 14
Laser Scan Angle
The laser scan angle can be set to Reduced Laser Beam Sweep (35°) or Full
Laser Beam Sweep (48°). Laser Scan Angle is not available for wide angle
models.
Default = Full Laser Beam Sweep (48°).
Decode Security
This selection allows you to adjust the decode security needed while scanning.
For good quality codes, choose Low to achieve fast scan speed. For codes
prone to misreads, choose High.
Default = Low.
Note: Increasing the security level may decrease the scan speed.
Continuous Scan Mode
This programs the engine to continuously scan and decode, with the laser and
motor staying on.
* Full Laser Beam Sweep (48°)
Reduced Laser Beam Sweep
(35°)
* Low
Low/Medium
Medium/High
High
Continuous Scan Mode